Electric power installation shall be based on the principle and premise of safety. The on-site installation work must follow the command of the relevant person in charge, Inner Mongolia Electric Power Design The installation shall be carried out in strict accordance with the relevant safety regulations, and the installation steps must not be changed or reduced at will, which greatly threatens the safety of relevant personnel and is not conducive to the later use of electricity. What are the precautions for power installation construction? Four Precautions for Electric Power Installation Construction

One dangerous point needs to be prevented in advance (need to be demonstrated by experts)

For some large-scale power installations, it is different from conventional power installations. Therefore, before installation, it must be noted that relevant experts must demonstrate the safety technical scheme to make the construction more secure, and also put forward sufficient design ideas for dangerous points to prevent in advance. Therefore, the relevant construction personnel should strictly follow the relevant measures for construction, and must not operate at will.

Second, pay attention to the assessment of technical personnel (workers must work with certificates)

In order to ensure the smooth implementation of power installation to a large extent, Inner Mongolia Electric Power Design Telephone Especially for large power installation, all technicians must carry out relevant safety technical training before construction, and must have relevant installation qualifications. In addition, they can only work after strict technical assessment, which is one of the important requirements to ensure the smoothness and safety of installation.

Third, pay attention to the overall planning of power failure (it is forbidden to open or close the switch at will)

In a good power installation, the relevant responsible departments must fully coordinate the power outage plan, and submit it to each construction department for review one by one. The detailed and accurate power outage plan will be submitted to each construction department, and the construction time will be reasonably arranged through the overall power outage plan.

Fourth, pay attention to strictly control the self provided power supply (prevent reverse power transmission)

In the process of large-scale power installation, the construction company should assign special personnel to carry out scientific management of its own power supply. Inner Mongolia Power Design should avoid related safety accidents caused by reverse power transmission, which is also one of the important principles to ensure the safety of power installation.